aiden/h8-536-decoder
1
0
Fork 0
Code Activity

timing adjustments

Browse Source
This commit is contained in:
Aiden
2026-05-25 22:17:36 +10:00
parent 6d4d9f0027
commit 4b50d0e98f
11 changed files with 313 additions and 40 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
README.md
View File

@@ -86,7 +86,7 @@ The real-device bench helper uses `pyserial`; install repo dependencies with `.\
- Handles the E-clock transfer instructions `MOVFPE` and `MOVTPE`.
- Recognizes likely LCD E-clock access routines at `H'F200`/`H'F201`, including busy-flag polling and data/control writes.
- Generates a separate C-like pseudocode view from the JSON, preserving labels, calls, branches, register names, inferred symbols, metadata comments, optional cycle notes, and simple structured `if`/`do while` patterns.
- Provides an early H8/536 emulator harness with ROM/RAM/register memory mapping, reset-vector boot, SCI1 transmit capture, MOV condition-code updates, `SCB/F`, stack/call/return support, indirect `JMP/JSR @Rn` dispatch, scaffolded SCI1 RXI/ERI/TXI and interval/FRT1-OCIA/FRT2-OCIA interrupt scheduling, a P9 bit-banged bus model, a 16x4 LCD bus/DDRAM model for `H'F200`/`H'F201`, and an opt-in P9 transfer fast path.
- Provides an early H8/536 emulator harness with ROM/RAM/register memory mapping, reset-vector boot, SCI1 transmit capture, MOV condition-code updates, `SCB/F`, stack/call/return support, indirect `JMP/JSR @Rn` dispatch, scaffolded SCI1 RXI/ERI/TXI and interval timer scheduling, manual-derived FRT1/FRT2 OCIA cycle scheduling, a P9 bit-banged bus model, a 16x4 LCD bus/DDRAM model for `H'F200`/`H'F201`, and an opt-in P9 transfer fast path.
- Includes an emulator probe that reports hot PCs, recent P9/SCI accesses, serial report queue/gate traces, RAM lifecycle watches, final SCI1/TXI state, and captured P9 byte candidates while running the real ROM.
- Includes an RX command probe that boots until SCI1 RXI is serviceable, injects host six-byte frames through RDR/RDRF, listens for device TX frames, and reports serial latch/table/LCD-buffer and emulated-LCD effects.
- Includes a bench helper for replaying the emulator-derived CONNECT LCD frame sequence against the real device through COM5, with optional COM6 relay power cycling and timestamped capture logs.
@@ -99,10 +99,11 @@ Current serial observations:
- Capture-side label: `heartbeat_alive_candidate`.
- Idle cadence from the reference file: 54 frames, average about 699.9 ms, min 601 ms, max 803 ms.
- Static/runtime finding: `F9C4` is a candidate idle heartbeat/report countdown. Init loads `H'14`, `loc_BA26` reloads `H'07` after a send, FRT2 OCIA decrements it, and `loc_4046` can enqueue report `H'0000` when it reaches zero and the queue is empty.
- Emulator timing finding: the ROM initializes FRT2 with `TCR=H'02` and `OCRA=H'7A12`; using the manual's `phi/32` prescaler gives a 1,000,000-cycle OCIA period, so the default `--clock-hz 10000000` models that tick as 100 ms and the post-send `F9C4=H'07` heartbeat delay as about 700 ms.
- Runtime-confirmed heartbeat path: `loc_4067` writes `H'0000` into the queue via a zero-extended word move, `loc_BAF2/loc_BB08` dequeue it, `loc_BB1C/loc_BB20/loc_BB2B` stage the TX bytes, and `loc_BA26` emits `00 00 00 00 80 DA`.
- Emulator LCD finding: the ROM writes the boot/no-active-session message to the LCD bus as ` CONNECT:NOT ACT` on line 0 by the time SCI1 RX is serviceable. Valid and invalid six-byte host frames leave that display active while normal serial replies/heartbeats continue.
- RX probe finding: the `--preset connect-lcd` sequence reaches the command-`0x04` handler; `04 00 00 80 00 DE` writes table index zero, fills the LCD line buffer with `CONNECT: OK`, and emits `02 00 02 00 00 5A` in the current emulator model.
- Bench follow-up: replaying the emulator CONNECT sequence on the real device did not switch the LCD to OK. The real device answered the `04 00 00 80 00 DE` step with `07 80 C0 60 20 5D` in the captured run and remained at `CONNECT NOT ACT`, which points to a missing gate/session precondition in the emulator.
- RX probe finding: with calibrated FRT timing, the `--preset connect-lcd` sequence reaches the command-`0x04` handler but leaves the emulated LCD at ` CONNECT:NOT ACT` and falls back to heartbeat output; the earlier `CONNECT: OK`/`02 00 02 00 00 5A` result is now treated as a legacy step-timer artifact.
- Bench follow-up: replaying the emulator CONNECT sequence on the real device did not switch the LCD to OK. The real device answered the `04 00 00 80 00 DE` step with `07 80 C0 60 20 5D` in the captured run and remained at `CONNECT NOT ACT`, so the next mismatch to chase is the missing visible `07 80 C0 60 20 5D` response/session context rather than the LCD OK branch.
- Observed capture labels such as `cam_power_button_candidate` and `call_button_candidate` are deliberately treated as capture overlays, not protocol facts hard-coded in ROM.
The generated listing is written to:
@@ -209,15 +210,16 @@ python h8536_emulator_rx_probe.py --help
- `--trace`: print executed instructions.
- `--stop-on-heartbeat`: stop only if `00 00 00 00 80 DA` is emitted through SCI1 TDR.
- `--interval-steps N`: tune the scaffolded interval timer cadence.
- `--frt1-ocia-steps N` / `--frt2-ocia-steps N`: tune rough FRT compare-interrupt cadence.
- `--clock-hz N`: set the CPU/phi clock used for calibrated FRT1/FRT2 compare timing; the default is 10 MHz.
- `--frt1-ocia-steps N` / `--frt2-ocia-steps N`: optional legacy overrides for forcing rough FRT compare cadence in targeted tests.
- `--p9-fast-path`: shortcut known P9 transfer routines for exploration.
- `--trace-report-gates`, `--trace-report-queue`, and `--trace-ram-lifecycle`: inspect the serial report queue, `loc_4046`/`F9C4` gate, and watched RAM byte history.
- `--target-frame "00 00 00 00 80 DA"`: compare staged/emitted TX bytes against an expected six-byte frame.
- `h8536_emulator_rx_probe.py "04 00 00 80 00"`: append the checksum, inject the host frame through SCI1 RX, and summarize responses.
- `h8536_emulator_rx_probe.py --preset connect-lcd`: replay the current CONNECT LCD activation candidates.
- `scripts\bench_connect_lcd_sequence.py --port COM5 --relay-port COM6 --prompt-screen`: power-cycle the bench device, wait for heartbeat readiness, send `04 00 00 40 00 1E`, `04 00 00 80 00 DE`, `04 00 00 C0 00 9E`, log RX/TX, and prompt for observed LCD text.
- `h8536_emulator_bench_replay.py captures\bench-connect-lcd-sequence-20260525-214411.txt --assert-bench-parity`: replay a real bench log into the emulator and intentionally fail while the emulator still emits `02 00 02 00 00 5A` instead of the bench-observed `07 80 C0 60 20 5D`.
- Current status: boots from `H'1000`, initializes SCI1, models the first P9 bit-banged handshakes, captures P9 byte candidates, can optionally fast-path known P9 routines, schedules FRT1/FRT2 OCIA, captures the ROM-driven LCD line ` CONNECT:NOT ACT`, and emits the observed heartbeat frame `00 00 00 00 80 DA`.
- `h8536_emulator_bench_replay.py captures\bench-connect-lcd-sequence-20260525-214411.txt --assert-bench-parity`: replay a real bench log into the emulator and intentionally fail while any response/LCD state still diverges from the bench-observed `CONNECT NOT ACT` plus `07 80 C0 60 20 5D` path.
- Current status: boots from `H'1000`, initializes SCI1, models the first P9 bit-banged handshakes, captures P9 byte candidates, can optionally fast-path known P9 routines, schedules FRT1/FRT2 OCIA from timer registers and `--clock-hz`, captures the ROM-driven LCD line ` CONNECT:NOT ACT`, and emits the observed heartbeat frame `00 00 00 00 80 DA`.
## Code Layout
@@ -248,7 +250,7 @@ python h8536_emulator_rx_probe.py --help
- `h8536/report_source_trace.py`: direct `loc_3E54` report enqueue source tracer.
- `h8536/table_xrefs.py`: table/index xrefs and LCD correlation report generation.
- `h8536/consistency.py`: decompiler/pseudocode semantic consistency checks.
- `h8536/emulator/`: early H8/536 emulator package split into CPU state, memory map, SCI1 TX capture, P9 bus model, LCD model, runner, probe, CLI, and peripheral scaffolding.
- `h8536/emulator/`: early H8/536 emulator package split into CPU state, memory map, SCI1 TX capture, P9 bus model, LCD model, manual-derived FRT timer scheduling, runner, probe, CLI, and peripheral scaffolding.
- `h8536/emulator/rx_probe.py`: host-frame injection and response/listener probe for SCI1 RX experiments.
- `h8536/board_profile.py`: Sony RCP-TX7 board-trace annotations, including the MAX202 RS232 path.
- `h8536/peripheral_access.py`: FRT/A-D TEMP-register access analysis.