Files
Sony-rcp/docs/research-notes.md
Aiden 455886691a git
2026-05-13 03:15:48 +10:00

80 lines
4.1 KiB
Markdown

# Research Notes
## What Is Well Established
- RM-M7G has a 41-page service manual available publicly through ManualsLib.
- RCP-TX7 has an official Sony 28-page operating manual PDF.
- RCP-TX7 has a 22-page service manual locally downloaded as
[docs/manuals/0a9f4a.pdf](manuals/0a9f4a.pdf).
- RCP-TX7 Volume 2 is probably the schematic/circuit volume and appears mostly
on paid/manual mirror sites.
- Both devices use Sony's 10-pin remote ecosystem through CCA-7 cables.
- RCP-TX7 uses a data protocol described as RS-232C-compliant/new protocol.
CCU-TX7 and CCU-D50 material point to 38,400 bps for RCP-TX7-class remotes.
- DXC-D30 material confirms that PC control is possible only with proper Sony
protocol.
- CCU-D50 command mode matters: `M5A mode` is the RM-M7G/basic-control path and
`TX7 mode` is the RCP-TX7/detailed-control path.
- The RCP-TX7/CCU-TX7 10-pin remote pinout is now mostly established:
serial data on pins 4 and 7, serial/data grounds on pins 5 and 6, DC power on
pins 9 and 10, composite video on pins 2 and 3, and spares on pins 1 and 8.
## What Is Not Yet Confirmed
- Exact Sony command protocol framing, checksums, command table, and session
behavior.
- Exact RCP-TX7 schematic availability from free public sources.
- Whether the RCP-TX7 22-page service manual contains enough board-level detail
for the current fault; Volume 2 is still the stronger schematic target.
- Exact CCA-7 wire color to pin mapping; extracted wiring diagrams are too
degraded to trust without continuity testing.
- Whether all CCA-7 cables are fully straight-through for every pin in every
system, although related service documentation strongly suggests this cable
family is the correct interconnect.
- Whether the serial lines are true RS-232 voltage levels on every compatible
camera/CCU path or merely RS-232C-framed/protocol-compatible.
- Exact differences between RM-M7G and RM-M7GP.
- Exact dimensional/weight discrepancy for RCP-TX7 between operating manual and
catalog-style references.
## Suggested Next Steps
1. Obtain the RCP-TX7 Volume 2 schematic manual.
2. Obtain a CCU-D50 service manual if CCU-side board repair becomes relevant.
3. Verify the normalized 10-pin pinout against the original PDF page images and
any physical CCA-7 cable available.
4. Build a continuity-tested cable map with connector orientation photos and
wire colors.
5. Check whether serial lines are true RS-232 voltage levels or TTL-level serial
with RS-232-style framing on any particular device.
6. Use a passive serial analyzer or high-impedance oscilloscope probes on a
known-working camera/remote combination before attempting custom control.
7. Document observed packets, timing, and state transitions in a future
`docs/protocol/` folder.
## Practical Reverse-Engineering Cautions
- The remote connector carries both power and data, so a wiring mistake can
damage the remote, camera, or CCU.
- Pin 10 is the positive remote power feed and pin 9 is its return in the
RCP-TX7/CCU-TX7 pinout. Verify polarity before applying power.
- Bench discovery notes have confirmed pin 9 as ground and pin 10 as power on
the current cable/panel under test; see [Discovery Notes](discovery-notes.md).
- Pins 2 and 3 are composite video, not serial data.
- Pins 4 and 7 are the serial data pair directions; use high-impedance probing
before attaching an adapter.
- Sony uses the phrase RS-232C in several documents, but that does not guarantee
standard DB-9 pinout, command language, or safe direct wiring to a PC serial
port.
- Some connected cameras disable local controls while RM-M7G/RCP-TX7 is present.
That can look like a fault if the control handoff behavior is not expected.
- CCU modes matter. CCU-D50 can operate in M5A mode or TX7 mode, and the wrong
mode can make a good panel appear nonfunctional.
## Sparse Forum Trail
Searches for exact forum-style discussions around `RM-M7G` and `RCP-TX7` found
mostly manual mirrors, reseller listings, and camera/CCU manuals. There does not
appear to be a rich public repair-forum trail for these exact units. The best
available repair information is in the service manuals and related CCU manuals.