{
  "name": "shutter-onoff-report-recover-ok-after-clear-0096-prompt",
  "notes": [
    "Friendlier visual test: clear the SHUTTER report gate, then re-light CONNECT OK before the manual button window.",
    "This is noisier than the latch-open test because the OK refresh stream can queue other active reports ahead of the button report.",
    "After the prompt, press SHUTTER ON/OFF while CONNECT OK is visible or during the following refresh window."
  ],
  "steps": [
    {
      "action": "power_cycle",
      "off_seconds": 1.5
    },
    {
      "action": "wait_ready",
      "heartbeats": 2,
      "timeout": 10.0,
      "require": true
    },
    {
      "action": "drain",
      "seconds": 0.25
    },
    {
      "action": "send",
      "label": "selector_zero_connect_seed",
      "frame": "00 00 00 80 00 DA",
      "listen": 0.60
    },
    {
      "action": "send",
      "label": "cmd5_latch_clear_0096",
      "frame": "05 01 16 00 00 48",
      "listen": 1.25
    },
    {
      "action": "send",
      "label": "recover_connect_ok_seed",
      "frame": "00 00 00 80 00 DA",
      "listen": 0.35
    },
    {
      "action": "send",
      "label": "quiet_active_refresh_0093_9020",
      "frame": "00 01 13 90 20 F8",
      "listen": 0.35
    },
    {
      "action": "prompt",
      "message": "Press Enter, then press SHUTTER ON/OFF during the refresh loop. Watch for 00 01 0F 80 00 D4 or 00 01 0F 20 00 74."
    },
    {
      "action": "drain",
      "seconds": 0.05
    },
    {
      "action": "repeat",
      "count": 16,
      "steps": [
        {
          "action": "send",
          "label": "maintain_ok_0093_9020",
          "frame": "00 01 13 90 20 F8",
          "listen": 0.45
        }
      ]
    },
    {
      "action": "send",
      "label": "repeat_last_for_hidden_report_check",
      "frame": "07 00 00 00 00 5D",
      "listen": 0.80
    },
    {
      "action": "listen",
      "seconds": 1.50
    }
  ]
}