aiden/h8-536-decoder
1
0
Fork 0
Code Activity

copy in progress

Browse Source
This commit is contained in:
Aiden
2026-05-26 16:01:20 +10:00
parent c0e3aaddee
commit d9a9dade41
7 changed files with 311 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
docs/pt2-protocol.md
View File

@@ -562,6 +562,7 @@ The `0x006D` copy path is now confirmed outside the earlier all-suite ordering c
- Selector `0x006D` dispatches to `H'3015`. Forced decoding shows it sets `F731.7`, loads `F798=H'C8`, sets `F795.6/F795.7`, sets display selector `F732=H'1903`, sets `FB02=H'64`, calls `48FA`, then sets `F76E.6`.
- The LCD dispatch for these states is now traced: `loc_48FA` reads the high byte at `F732`, so `F732=H'1903/H'1904` selects display page `0x19`, not direct page `0x03/0x04`. `493E[0x19] -> H'930A`; that page's local table at `H'931C` includes `H'9F6A` for `COPY` / `IN PROGRESS` and `H'9FDA` for `COPY` / `COMPLETED`. The low byte at `F733` is the substate selector: `0x03` is in-progress and `0x04` is completed.
- This makes the likely copy handshake: `0x006D` starts copy and sets the `F795.6/F795.7` in-progress flags; `0x006C` is the completion/exit sibling only when those flags are live. Sending `0x006C` alone can therefore blank or clear state instead of displaying `COPY COMPLETED`.
- Bench step-through confirmed the sequence model: `006C` alone produced `CONNECT OK -> blank`; `006D` alone produced `CONNECT OK -> COPY IN PROGRESS`; `006D` followed by `006C` after 250 ms produced a brief `COPY IN PROGRESS` then `COPY COMPLETED`; the same after 1.0 s and 1.5 s produced a longer `COPY IN PROGRESS` then `COPY COMPLETED`; after 2.0 s or 2.5 s it fell to `CONNECT:NOT ACT` instead of completing. Repeating `006D` before `006C` also completed successfully in the 2x and 3x repeat tests. This points to an active completion window that can likely be refreshed/restarted by additional in-progress/progress traffic, rather than a stateless command.
- The FRT1 timer path decrements `F797` and `F798`; when either reaches zero, it clears `F731.7`. This matches the observed transient display modes falling back to `CONNECT:NOT ACT`.
- The string `COPY IN PROGRESS` is present in the ROM LCD resources, so the `006D` result is not a generic serial artifact.
- Manual interpretation: the RCP-TX7 operating manual describes `COPY IN PROGRESS` as the LCD state shown during the multi-camera `COPY TO SLAVES` data-transfer operation over the RS232C command-link system. During that state, all linked RCP units display the message and their buttons/knobs are locked until `COPY COMPLETED`. Therefore selector `0x006D` is best treated as entering a command-link copy/data-transfer state, not as a normal CCU connection ACK.