Digital Video Camera 1. -D30 Digital Video Camera DXC-D30WS Betacam SP Camcorder PVW-D30 Digital Camcorder DSR-130 # DXC-D30 ## DXC-D30WS ## PVW-D30 ## DSR-130 ## The Sony DXC-D30 is a bench mark setting digital video camera designed as a top-end model for video professionals. Incorporating Sony's latest DSP (Digital Signal Processing) technology based on Sony's TruEye™ process, the DXC-D30 offers the faithful color reproduction never before experienced with conventional analog or digital cameras. Drastic vertical smear reduction and high sensitivity achieved by the Power HAD™ CCDs provide more shooting opportunities, while maintaining superior picture quality. Now Sony introduces the DXC-D30WS wide screen camera to Sony's professional digital camera line-up. The DXC-D30WS incorporates three Power HAD WS™ CCDs which have been specifically designed for a 16:9 aspect ratio, switchable to 4:3. When shooting in the 16:9 format, the DXC-D30WS offers outstanding picture quality and tremendous flexibility for a variety of applications. The DXC-D30 and DXC-D30WS are cameras which fit the current analog and digital acquisition systems as well as Sony's new production system based on the DVCAM digital recording format. These cameras dock directly not only to existing camera adaptors and analog on- board VTRs via an analog interface, but also to the newly developed Sony DSR-1 DVCAM Digital Recorder via a component digital interface, "Pro 76-pin Digital" connector. The DXC-D30/D30WS also offers superior in the operational convenience. Responding to the increasing demands from professionals, it provides a variety of key automatic functions. With all these features packed in its compact camera body, the DXC-D30/D30WS creates a new world of acquisition in a wide spectrum of applications. The DXC-D30 is a digital signal processing camera, and its sister model DXC-D30WS is a wide-screen camera for the 16:9 aspect ratio with a switching capability to also capture the image in a 4:3 aspect ratio. Both models have the following features. # Sony State-of-the-art Digital Camera Signal Processing Technology The DXC-D30/D30WS incorporates state-of-the-art digital n High Stability and camera processing technology which is designed to fully Uniformity exploit the benefits of DSP (Digital Signal Processing). Having DSP technology, the DXC-D30/ D30WS assures a high degree of stability n TruEye™ Process through its video output. The picture The TruEye digital signal process employed in the DXC-D30/ tone is kept uniform among multiple D30WS is a true innovation in camera signal processing, DXC-D30/D30WS's. made possible by Sony digital signal technology. In conventional RGB analog or digital processing, some n Detail Corrections by DSP nonlinear signal processing occurs after gamma correction, Skin Detail with Auto Detection of Active Area such as white clip and knee correction, and can result in hue The Skin Detail function in the DXC-D30/D30WS gives the factor distortion - a phenomenon that is particularly obvious in subject a pleasing facial complexion, while maintaining the extreme high-light conditions. This significant problem is sharpness of the other areas. The designated active area of totally eliminated by the TruEye process which manages video Skin Detail can be set with the digital circuits by simply signal data according to three factors - brightness, hue and adjusting the Area Detect Cursor on the viewfinder screen and saturation - so that color in even a wide dynamic range can be SKIN SET button on a camera side panel. The color range of reproduced as faithfully as by the human eye without hue the Skin Detail active area and Skin Detail level can be also set factor distortion. by the viewfinder menu system. The range of color detection Based on the TruEye system, the DXC-D30/D30WS also for detail correction is 360 degrees. offers a unique feature called DynaLatitude™ which adaptively Black Halo-Free, Clean Detail manages the contrast of each pixel according to a histogram of The DXC-D30/D30WS provides edges with a natural line and video signal level distribution. The DynaLatitude feature appropriate thickness in areas with extreme dark-to-light or brings a new dimension to other technologies such as light-to-dark transitions, by digitally optimizing the level of Dynamic Contrast Control (DCC). The DynaLatitude feature detail signal to each of the transition points, not by just optimizes video level distribution based on video signal clipping the detail signal. Consequently, the 'Black Halo' effect histograms in order to utilize the limited dynamic range of the which is seen as thick black edges surrounding an extremely video signal standard. bright object, as well as a stepping diagonal edge, have been dramatically reduced. n Real Time Self Diagnostics Red Vertical Detail Correction Even though the DXC-D30/D30WS was designed to be highly The Vertical Detail Correction signal, which is digitally created reliable, it employs a powerful self diagnostic system which from both the Green and Red signals, assures image informs the operator, in real time, of the connecting conditions sharpness when shooting highly saturated subjects or subjects of the LSI (Large Scale Integration) circuits and printed circuit bathed in red light. boards, as well as electrical connection conditions between the Horizontal Detail Frequency Control camera and a VTR. Even if the operator is not familiar with The Horizontal Detail Frequency can be controlled by the VF digital circuitry, the DXC-D30/D30WS informs them of exactly Menu System according to the user's preference. what is happening. n High Picture Quality The horizontal resolution and the signal to noise ratio of the DXC-D30/D30WS are ranked among the highest in the industry. The Modulation Depth of the DXC-D30 is 55% (typical) at 5MHz and that of the DXC-D30WS is 70% (typical) in the 16:9 mode. The newly developed digital circuits drastically reduce the aliasing phenomenon, which was found even in conventional digital cameras, while maintaining the high resolution. Power HAD CCD (DXC-D30 only ) The DXC-D30 incorporates three Power HAD CCD sensors. These sensors feature a minimal smear level conventional FIT CCDs, which addresses the tough of the high-end production field. The total performance Power HAD CCD sensor approaches that of the |equivalent to demands|Programmable Programmable| |---|---| |of the|Auto Iris AGC DXC-D30 AE| |standard FIT.|Auto Iris Conventional Camera| n Low Smear Level Vertical Smear Level of the DXC-D30 is -125dB which is the same level as conventional FIT sensors. This feature will give # DXC-D30 ||| |---|---| ||| # DXC-D30WS DSR-130 the operator more freedom to shoot subjects in high light situations. n High Sensitivity The Power HAD sensor in the DXC-D30 achieves a high sensitivity of F11.0 (at 2000 lx, 3200K) and minimum illumination of 0.5 lx. This feature affords a greater opportunity to shoot under extremely low-light conditions. n High S/N Ratio The improved CCD process combined with the camera's new digital circuits means a reduction in CCD noise. The signal- to-noise ratio is improved to 63dB, one of the highest specification in the industry. # Enhanced Ease of Operation Responding to the increasing demands for more automatic functions in a professional level camera, the DXC-D30/D30WS boosts several new and improved functions sure to please the most demanding camera person. n Total Level Control System (TLCS) Even if the incoming light exceeds the range of the automatic iris control either above or below, by using the iris control in combination with Auto Gain Control (AGC) and CCD AE (Auto Exposure, the application of variable shutter of CCD), the DXC-D30/D30WS offers proper picture exposure. This function is called TLCS. While still maintaining low-noise characteristics, TLCS affords ease of operation for this high- end professional camera. - n EZ Focus Function EZ Focus is a function to assist focusing without stopping down the lens. By just pushing the EZ Focus button, the iris is automatically opened so that the depth of field is reduced to make critical focusing easier. At the same time, the electronic shutter is automatically set to obtain the correct light level. The EZ Focus function is overridden while recording. n New EZ Mode Function Instantly setting a camera to a standard or an auto position is done by simply pressing the EZ Mode button. The DXC-D30/ D30WS has two alternative EZ Modes - STANDARD or CUSTOM. When set to CUSTOM EZ Mode, the camera setting is changed in accordance with the selected setup file. n Auto Tracing White Balance (ATW) In the DXC-D30/D30WS, tracing of the white area in Auto Tracing White Balance (ATW) is fast enough to meet professional demands. In addition, the accuracy of the white balance adjustment is enhanced. # Enhanced Functions for Picture Creation n Camera Setup Files The DXC-D30/D30WS is equipped with a convenient VF (Viewfinder) Menu System; a control menu with superimposed characters on the VF screen. Depending on the requirement, the menu contents can be selected with the SETUP (STD/FILE) selector switch. STD position (Standard VF Menu System) When the SETUP switch is set to the STD position, setting of the camera parameters or defining of the switch functions can be done with the VF Menu System, the same way as with conventional Sony cameras. # FILE position # (VF Menu System for File Management) When the SETUP switch is set to FILE position, a total of eight setup files can be used with the dedicated VF Menu System. These files are as follows. Factory Preset Files Five Factory Preset Files are set by Sony to accommodate the five most common lighting situations, such as STANDARD, HIGH SATURATION and FLORESCENT. User Files Three User Files allow the operator to set camera parameters which match their own particular shooting situations. User Files can be easily made by modifying a Factory Preset File. n Scene Files With the optional Sony RCP-TX7 Remote Control Panel with powerful remote capabilities, 16 scene files can be created and stored. Almost all the parameters for camera operation and camera set-up can be stored into scene files, and the most suitable file for each shooting situation can be instantly recalled using the menu button on the RCP-TX7. n Setup Data Management with DVCAM Cassette The DXC-D30/D30WS combined with the DSR-1 has the following camera data management; SetupNavi™ - Camera Setup File Storage The DXC-D30/D30WS combined with the DSR-1 has the SetupNavi function to store the User Files or Factory Preset Files of the DXC-D30/D30WS directly onto VAUX (Video Auxiliary) data territory of the DVCAM cassette tape. The data can be stored on or recalled from the tape via the VF Menu System. Using the DVCAM cassette as a medium, the setup data can be transferred to other DXC-D30/D30WS's. SetupLog™ - Automatic Recording of Camera Setting Data Even without using the file system, the information of each setting parameter of the DXC-D30/D30WS for every shot is automatically recorded by the DSR-1 on the VAUX territory in each video track of the DVCAM cassette tape. This function is called SetupLog. It is useful not only for the camera operator if there is a need to re-take the same shot, but also for checking the operating conditions during a particular shoot. n File Management from Personal Computers The REMOTE connector (10-pin) of the DXC-D30/D30WS is designed in accordance with the RS-232C standard. This feature also makes it possible to manage the setup file data from personal computers with proper Sony protocol. # Convenient Features n Remote Control of Hyper Gain Hyper Gain is a convenient function for shooting under extremely low-light situations without using a lighting system. It instantly increases the gain-up value to be +36dB in total, combining the electronic gain-up of +30dB and the Dual Pixel Readout effects (equivalent to +6dB gain-up). The Hyper Gain can be assigned to be the highest gain position (H) of the GAIN selector switch (H/M/L). Consequently, Hyper Gain can be switched on or off remotely from the RM-M7G, CCU-M5, CCU-M7 or the CCU-TX7 system. n Adjustable Black Stretch and Compress The contrast in the black area of the image can be adjusted by the black stretch/ compress control function. Black Stretch emphasizes the contrast in the dark areas, while Black Compress enhances or deepens the darkness. n Dual Zebra The DXC-D30/D30WS has two types of zebra patterns - 'ZEBRA 1' and 'ZEBRA 2'. 'ZEBRA 1' can be set within a range of 70 IRE to 90 IRE by 1 IRE. 'ZEBRA 2' provides a zebra pattern in the area with more than 100% video level. Dual zebra display - to show both ZEBRA 1 and 2 - as well as display of either one is possible. n Monitor Out The DXC-D30/D30WS is equipped with a MONITOR OUT connector (BNC). Via this connector, the user can check the shooting conditions by displaying a color picture with characters superimposed on a connected external monitor. This is in addition to the image displayed on the unit's viewfinder. - n Others · Programmable Gain · Clear Scan (CLS) · Date & Time Superimposition · Built-in 1kHz Audio Reference · Adjustable Shoulder Pad · SMPTE/ SNG Color Bars # System Versatility n Dockable to a Variety of VTRs The DXC-D30/D30WS is equipped with two types of connectors - the new 'Pro 76-pin Digital' connector and the conventional 'Pro 50-pin' connector. The Pro 76-pin Digital connector supplies 4:2:2 10-bit component digital output, which allows expandability for unlimited applications and future digital interfacing, with a variety of devices. Via the Pro 76-pin Digital connector, the DSR-1 DVCAM Recorder can be directly docked to the DXC-D30/D30WS. Through the Pro 50-pin connector, a variety of dockable analog video recorders ## 76-Pin ## 76-Pin, 50-pin ## 50-Pin can be attached to the DXC-D30/D30WS. DSR-1 DXC-D30/D30WS PVV-3 n Supports Current CA and CCU Via the Pro 50-pin connector, the CA-537/ 327/ 325A/ 325B Camera Adaptors can also be used just like the current camera system. Via the Pro 76-pin Digital connector, the CA-TX7 Triax Adapter can be connected. Sony's RM-M7G, CCU-M5, CCU-M7 and CCU-TX7 can also be used for remote control operation. ## Use as a portable camera DXF-41 or 51 (Large viewfinder) C-74/ECM-670/ECM-672 (External Mic.) COU-TX7 (Camera Operation Unit) EC-0.5C2 (Mic. cable) CAC-12 Triax Cable (Max.1500m) (Mic. holder) DXF-701WS (Standard viewfinder) CCA-7 (Max. 50m) CCU-TX7 (Camera Control Unit) RCP-TX7 (Remote Control Panel) RM-LG1 CA-TX7 DXC-D30/D30WS (Camera head) ## VCL-918BY CCU-M7 (Camera Control Unit) CCZ-A (Max.300m) (Zoom lens) n With Personal Computers The 10-pin connector (REMOTE Connector) for the RM-M7G and RCP-TX7 is designed in accordance with the RS-232C standard. This allows the CCA-7 CCU-M5 (Camera Control Unit) CCZ-A (Max.300m) CAC-4 CCA-7 (Chest pad) VO-8800 CCZQ-A (Max.10m) (U-matic recorder) VCT-U14 (Tripod adaptor) DXC-D30/D30WS to be remotely controlled from an external personal computer with proper Sony protocol. RM-M7G RCP-TX7 (Remote controller) (Remote Control Panel) CA-537 CCZQ-A (Max.10m) S-VHS portable VTR or EVV-9000 + VA-90 ## Camcorder operation BVW-50 (Betacam SP recorder) CCZ-A (Max.10m) PVV-3 (Betacam SP 2000PRO recorder) CCU-M5 (Camera Control Unit) CCQ-AM (Max.100m) DSR-1 (DVCAM recorder) VO-8800 CCQ-BRS (Max.10m) (U-matic recorder) EVV-9000 (Hi8 recorder) S-VHS portable VTR or EVV-9000 + VA-90 CCQ-BRS (Max.10m) ## n VCL-918BY Inner Focus Zoom Lens To meet the enhanced performance of the DXC-D30/ D30WS, the Sony VCL-918BY x18 zoom lens is newly incorporated as their standard lens. Its inner focus adjustment method and excellent performance will further expand acquisition applications of the cameras. CA-327 SONY Hi8 or Y/C cable 0:00:00 S-VHS VTR desk Monitor Y/C cable ## Industrial use AG-7450/7450A (Panasonic Video recorder S-VHS recorder) Graphics capture computer CA-511 CA-512P DNV-5 (Betacam SXTM recorder) CA-511 BVV-5 (Betacam SP® recorder) CA-513 BR-S422U (JVC S-VHS recorder) CA-325A AC Video recorder BC-1WD (Battery Charger) NP-1B (Battery) CA-325B Graphics capture computer AC LC-421 LCR-1 (Rain cover) (Carrying case) CMA-8A (AC power adaptor) In addition to the features described previously, the DXC-D30WS has the following features. # Power HAD WS™ CCD The DXC-D30WS is equipped with three chips of newly developed 2/3-inch Power HAD WS IT CCDs with a high packing density of 520,000 pixels (total)/ 480,000 pixels (effective). Since the CCD is designed for the 16:9 aspect ratio, with a capability to be switched to 4:3, high quality images can be obtained in the 16:9 mode without any image loss. High sensitivity of F11 (at 2000 lx, 3200K), remarkable signal to noise ratio of 63dB and a virtually invisible smear level of -120dB are achieved. # DXF-701WS The DXF-701WS is a new 1.5-inch black and white viewfinder developed for the DXC-D30WS, with the following features. The DXF-701WS can also be used with the DXC-D30 in the 4:3 mode. n Aspect Ratio Adjustment With the DXF-701WS, the viewfinder scanning size can be switched into AUTO or FULL, using the viewfinder control menu. In AUTO mode, viewfinder scanning size is automatically changed according to the camera aspect ratio (4:3 or 16:9), as shown in (A) and (B). In FULL mode, the image is displayed using the full size of the screen. This means that the 16:9 image in FULL mode is vertically enlarged as (C) shows, while the 4:3 image in FULL mode is the same as AUTO mode (A). As a result, the shape in the 16:9 picture captured in FULL mode is not exactly the same as what it should be, but the use of the whole screen in FULL mode provides greater viewing comfort. n V/H Detail Control Both vertical and horizontal detail levels can be variably adjusted by the PEAKING potentiometer on the viewfinder body, while monitoring the ratio of both detail levels. n Two Red REC Tally Lamps In addition to the standard REC tally above the viewfinder screen, another REC tally is located below the screen to prevent overlooking the REC tally indication. This second tally lamp is ON/OFF switchable through the ADVANCED MENU. # 16:9 and 4:3 Switchable Thanks to the adoption of the new wide aspect CCDs and digital signal processing, the DXC-D30WS can operate in both 16:9 widescreen and conventional 4:3 mode without any additional conversion equipment. # 16:9 ID Pulse When shooting 16:9 images, the DXC-D30WS automatically adds a wide aspect ID pulse signal, which indicates that the picture is shot in 16:9 aspect ratio, on the video output signal from the camera VBS OUT, MONITOR OUT and 50-pin/76-pin interface. The 16:9 aspect ratio picture shot by the DXC-D30WS can be recorded and played back with Sony DSR-1/30/60/80/85 DVCAM Players/Recorders, SVO-5800 V-VHS Recorder, SVP-5600 S-VHS Player and all types of UVW/PVW Players/Recorders. # Selectable Preset White Balance The color temperature of the preset white balance can be switched to conventional 3200K or 3000K. This makes it possible for the DXC-D30WS to capture natural color reproduction even under a low color temperature lighting condition. AUTO/FULL mode in 4:3 AUTO mode in 16:9 FULL mode in 16:9 Figure (A) Figure (B) n TAKE Tally Lamp The DXF-701WS also has a TAKE tally lamp for use with the ClipLink system. The TAKE tally can also be used as a second tally lamp for CCU operations. n Reliable and Ergonomic Design A diecast aluminum body makes the DXF-701WS extremely durable. The viewfinder's position can be adjusted in a broad horizontal plane according to the operator's preference. The large diameter eye cup not only provides greater comfort but also simplifies focusing. A wide range of diopter adjustments (-3 to 0) is provided to compensate for differences in eyesight. Figure (C) # High Quality Betacam SP Camcorder The PVW-D30 is a Betacam SP PRO2000 Camcorder consisting of the DXC-D30 and the PVV-3 Betacam SP Recorder. The high quality picture of the DXC-D30 can be directly recorded onto the Betacam SP format - one of the best analog recording formats currently available in the professional field. The status information and data from the PVV-3, such as time code, recording audio level, remaining battery power, and remaining tape time can be superimposed on the viewfinder. (Note: These features and functions are also available with the DXC-D30WS when combined with the PVV-3.) ## Acquisition Tool for the DVCAM System The DSR-130 Two-piece DVCAM Camcorder - the combination of the DXC-D30 and the DSR-1 Digital Recorder - is an acquisition tool based on the DVCAM recording format. The following are the basic features of the DSR-130. (Note: The following features and functions are also available with the DXC-D30WS combined with the DSR-1.) n DVCAM Recording Format Sony's DVCAM recording format is designed for professional use. While maintaining the playback compatibility with the consumer DV recording format, higher picture quality is achieved by the wider track pitch of the DVCAM format. n Equivalent to One-piece Camcorder The DXC-D30 and the DSR-1 have been carefully designed so that the DSR-130 can operate just like a one-piece camcorder. The recording status and the warning messages from the DSR-1 can be superimposed on the viewfinder of the DXC-D30. The body of the DSR-1 and the DXC-D30 are made of magnesium, which makes the DSR-130 a lightweight yet durable camcorder. When recording with the DSR-1, both DVCAM Mini Cassette tapes (PDVM -40ME/ 32ME/ 22ME/ 12ME or PDVM-40N/32N) and DVCAM Standard Cassette tapes (PDV-184ME/ 124ME/ 94ME/ 64ME or PDV-184N/ 124N/ 64N) can be used without any adaptors. Maximum recording time of PDVM and PDV tapes are 40 minutes and 184 minutes respectively. ## Time Code Superimposed during Playback For operational convenience while shooting, the time code is superimposed on the viewfinder screen or MONITOR OUT screen, even during playback. ## CH-1 Audio Level Control The CH-1 audio level can be adjusted with the level control located on the front panel of the DXC-D30 while recording with the DSR-1. ## Edit Search The DSR-1 incorporates an Edit Search function. Its control button is located on the side panel of the DXC-D30 to afford easy access while shooting. ## Freeze Mix Function When the camera operator needs to shoot a subject in the same framework as that of a previously recorded subject, it was very difficult to perfectly place the subject in the same position as the previous shot with conventional cameras. With the DSR-130, a picture previously recorded on the DVCAM tape can be superimposed on the viewfinder screen, so that the camera operator can easily frame or position the subject just like a previous shot. # ClipLink System The ClipLink system is a comprehensive shooting information and image management system necessary for the total digital production process, ranging from acquisition to editing. The ClipLink system in combination with Sony's new digital video products such as the DSR-130 Digital Camcorder, the Digital VTRs (DSR-85/80/60), and the ES-7 EditStation™ System will enhance the productivity and operating efficiency throughout the entire video production process. n ClipLink Data The DSR-130 automatically generates two types of useful information while shooting, which drastically reduces the work traditionally required during the video tape editing process. One is Index Picture which is a digitally miniaturized picture of the video image of the "in" point of each shot - MARK IN point*. Index Pictures are recorded on the DVCAM tape. The other is shot information needed for the editing process, such as reel number, scene number, take number, time code of MARK IN/ MARK OUT point*, and OK/NG status. This reference data is stored in the Cassette Memory of the DVCAM Cassette Tape. The combination of these two types of information is called ClipLink data. The ClipLink data can be quickly uploaded to the EditStation System from the DVCAM Digital VTRs, so that the selection of usable shots can be done using only visual ClipLink information displayed on the monitor of the EditStation. The ClipLink system eliminates the work of having to load all the shots on the tape to the EditStation System. n TAKE button The DXC-D30 has a TAKE button on the front of the camera. Depending on the situation, the user can assign it to operate either in a MARK or a CUE mode using the VF Menu System. In the MARK mode, it triggers to record the time code of MARK IN or MARK OUT points* as well as an Index Picture of the MARK IN point during shooting everytime it is pushed. The MARK button is useful, for example, if the program origination is based on a certain sequence. In the CUE mode, the moment the recording is started or ended is regarded as the MARK IN or MARK OUT point. In addition to this, the time code of the CUE point** is recorded by pushing the CUE button. Logging of the CUE point is useful for shooting events where the shooting sequence is undetermined or very changeable. - * MARK IN/ MARK OUT point: Starting/ Ending point of a duration to be used for editing. In the ClipLink System, the Index Picture of the MARK IN point is automatically recorded as well. - **CUE point: The point where an operator wants to review work at a later time. The CUE point does not accompany an Index Picture. - n NG button NG (No Good) status for each take can be input by pushing an NG button on the DXC-D30 during or after shooting. Unless the NG button is pushed, OK status is automatically input. n RM-LG1 The RM-LG1 is a new Remote Control Unit specially designed for the remote control of ClipLink and VTR REC operation. It has two switches, which can be assigned by the operator from four choices: VTR, MARK, CUE or NG. || |---| || || || || || || || || || || || || - n ClipLink - Basic Information in ClipLink Data ## Index Picture ## Time Code (OUT) ## Time Code (IN) ## Scene No. 1 00:01:01 00:05:22 2 00:05:23 00:18:20 ## DSR-130 3 Digital Camcorder 00:18:21 00:24:13 Automatically recorded. ES-7 EditStation ## DVCAM or DV Cassette Tape |!¡||| |---|---|---| ||1|| |||| |!™||| |||| |6||| |||| |||| |||| |||!¢| |DXC-D30 Series||| |DXC-D30F1|DXC-D30K1|DXC-D30L1 DXC-D30H| |1 DXC-D30 Camera Head Yes|Yes|Yes Yes| |2 Camera Handle* Yes|Yes|Yes Yes| |3 DXF-701WS Viewfinder Yes|Yes|Yes Option| |4 External Yes|Yes|Yes| |6 VCT-U14 Tripod Adaptor Yes|Yes|Yes Option| |7 VCL-918BY Zoom Lens Yes|Yes|| |8 LC-421 Carrying Case Yes|Option|Option Option| |!¢ RM-LG1 Unit Yes|Yes|Yes| |DXC-D30WS Series|Series|| |DXC-D30WSL||PVW-D30F1 PVW-D30K1 PVW-D30L1| |!£ DXC-D30WS Camera Head Yes 1|DXC-D30 Camera Head|Yes Yes Yes| |2 Camera Handle* Yes !¡|PVV-3|Yes Yes Yes| |3 DXF-701WS Viewfinder Yes !™|Handle for PVW-D30*|Yes Yes Yes| |4 External Yes 3|DXF-701WS Viewfinder|Yes Yes Yes| |6 VCT-U14 Tripod Adaptor Yes 4|External Microphone*|Yes Yes Yes| |!¢ RM-LG1 Unit Yes 5|Shoulder|Yes Yes Yes| Microphone* Logger Strap* 6 VCT-U14 Tripod Adaptor Yes Yes Yes Option Logger |7 VCL-918BY Zoom Lens Yes Yes| |---| |8 LC-421 Carrying Case Yes Option Option| |!¢ RM-LG1 Unit Yes Yes Yes| |DSR-130 Series| |DSR-130F1 DSR-130K1 DSR-130L1| |1 DXC-D30 Camera Head Yes Yes Yes| |9 DSR-1 Yes Yes Yes| |!º Handle for DSR-130* Yes Yes Yes| |3 DXF-701WS Viewfinder Yes Yes Yes| |4 External Microphone* Yes Yes Yes| |5 Shoulder Yes Yes Yes| |6 VCT-U14 Tripod Adaptor Yes Yes Yes| |7 VCL-918BY Zoom Lens Yes Yes| |8 LC-421 Carrying Case Yes Option Option| |!¢ RM-LG1 Unit Yes Yes Yes| Strap* Option Logger - *The microphone, shoulder strap and handles are available only as service parts. |||||| |---|---|---|---|---| |DSR-1|PVV-3|VA-300|EVV-9000|VO-8800| |DVCAM Digital Recorder|Betacam SP 2000 PRO|Playback Adaptor for PVV-3|Hi8 Videocassette Recorder|Portable SP U-matic Recorder| |DNV-5|BVV-5|RM-LG1|CCU-TX7|CA-TX7| |Betacam SX Recorder|Betacam SP Recorder|Remote Control Unit|Camera Control Unit|Camera Adaptor| |RCP-TX7 Remote Control Panel for|COU-TX7 Camera Control Unit for|RM-M7G Remote Control Unit|CCU-M5 Camera Control Unit|CCU-M7 Camera Control Unit| |CA-537|CA-327|CA-325A|CA-325B|CA-511| |Camera|Camera|RGB (AC|RGB (DC|Camera (for BVV-5 and| ||models with serial|above||DNV-5)| ||10270 can be used)|||| |CA-512|CA-513|NP-1B|BP-90A|DC-520| |Camera Adaptor|Camera Adaptor|NiCd Rechargeable Battery|NiCd Rechargeable Battery|Battery Case to contain two| ||S-VHS BR-422U S-VHS|||NP batteries| |on-board recorder)|on-board recorder)|||| # DC-500 Battery Case for BP-90A # DC-210 Battery Case for BP-90A (Waist belt type) # BC-1WD Battery Charger for up to four NP-1B BC-410 Battery Charger for four BP-90A's and four NP-1B's # BP-L60/L90 Rechargable Li-ion Battery Pack (only with the DSR-1, PVV-3 and EVV-9000) |||||| |---|---|---|---|---| |BKW-L601|BC-L100|DC-L1|DC-L90|CMA-8A| |dockable VTRs|and|with BC-L100|BP-90A with BC-L100|| |EVV-9000)||||| |AC-550|ECM-672|C-74|EC-0.5C2|CAC-12| |AC Power Adaptor|Electret Condenser|Condenser Microphone|Microphone Cable|Microphone Holder| |WRT-810A|WRT-820A|WRR-855A/810A (*)|DXF-701/701WS|DXF-41| |||(For WRR-855A, BTA-801||| |||Mount Adaptor is||| |DXF-51 5-inch Monochrome|VCT-U14 Tripod Adaptor|CAC-4 Chest Pad|DR-100 Intercommunication|CCZ-A2/A5/A10 Connecting Cable (26-pin - 26-pin)| |||||(*) WRR-855A/810A cannot be used in| # CCZQ-A2/A5/A10 Connecting Cable (26-pin - 14-pin) # LC-304SFT Soft Carrying Case Lenses (2/3-inch format lens) # LC-421 Carrying Case # LCR-1 Rain Cover some areas. # VCL-918BY A8.5 x 5.5 BEVM-28 A15 x 8BEVM-28 VCL-916BYA J15a x 8BIRS YJ18 x 9BIRS (F1.8, 9 to 162 mm) (F1.7, 5.5 to 47mm) (F1.7, 8 to 120mm) (F1.8, 9.0 to 144mm) (F1.7, 8 to 120mm) (F1.8, 9 to 162mm) 1. -D30/D30WS Video Camera Head Sensing Sony Bayonet Signal system: system Scanning system: frequency: frequency: Sync system: signal Minimum illumination: 0.5 lx with F1.4, Hyper gain (30dB+DPR) Hyper gain Sensitivity: F11 at 2000 lx (3200K, 89.9% reflectance) (typical) Gain selection: -3dB, 0dB, +3dB, +6dB, +9dB, +12dB, +18dB, 18dB+DPR, Hyper speed (1/60.3 Signal-to-noise (typical) Registration: Geometric distortion: Below measurable level Video output: Camera head BNC connector: VBS: 1.0 Vp-p, sync negative 26-pin connector of CA-537 docked to DXC-D30/D30WS VBS: 1.0Vp-p, sync negative Y/R-Y/B-Y: Y: 1.0Vp-p, sync negative R-Y/B-Y: 700mVp-p RGB: 1.4Vp-p Y/C: Y: 1.0Vp-p, sync negative C: 286mVp-p Inputs/ Outputs: INTERFACE: Pro 76-pin Digital, Pro 50-pin VIDEO OUT: BNC-type MONITOR OUT: BNC-type LENS: 12-pin VF: DIN 8-pin, DIN 20-pin REMOTE1: Stereo mini REMOTE2: 10-pin Power requirements: DC 12V (10.5 to 17V) Power consumption: DXC-D30:12W (camera head only), 12.7W (with the DSR-1) DXC-D30WS:14.9W (camera head only), 15.3W (with the DSR-1) Operating temperature: -10˚C to 45˚C (14˚F to 113˚F) Storage temperature: -20˚C to 60˚C (-4˚F to 140˚F) Mass: DXC-D30 Approx. 2.3 kg (5 lb 1 oz) for camera head only Approx. 3.1kg (6 lb 13oz) with VF Approx. 4.3 kg (9 lb 8 oz) with VF and lens (w/o lens hood) DXC-D30WS Approx. 2.5 kg (5 lb 8 oz) for camera head only Approx. 3.3kg (7 lb 4 oz) with VF Dimensions (w/h/d): 121 x 206 x 273 (mm) 4 7/8 x 8 1/8 x 10 3/4 (inches) DPR is equivalent to +6dB gain up. 18dB+DPR: Equivalent to +24dB 24dB+DRR: Equivalent to +30dB Hyper Gain (30dB+DPR): Equivalent to +36dB |Image device:|3-chip 2/3-inch, Interline-Transfer CCD|Power consumption:|24.8W (with DXF-701WS Viewfinder)| |---|---|---|---| |Optics:|F1.4 medium index prism system|Mass:|7.3kg (16 lb 2 oz) (incl. DXF-701WS viewfinder, microphone,| |Effective picture elements:|768 (h) x 494 (v) (DXC-D30)||VCL-916BYA lens, NP-1B battery, videocassette, carrying handle)| ||980 (h) x 494 (v) (DXC-D30WS)|Operating time:|60 min.| |Total picture elements:|811 (h) x 508 (v) (DXC-D30)|Dimensions (w/h/d):|121 x 206 x 344 mm| ||1038 (h) x 504 (v) (DXC-D30WS)||(4 7/8 x 8 1/8 x 13 5/8 inches)| |area:|6.6mm x 8.8mm (DXC-D30)||| ||9.6mm x 5.4mm (DXC-D30WS)||| |Built-in filters:|1: 3200K(D30), 3200K/3000K(DXC-D30WS)|Picture tube:|1.5-inch monochrome| ||2: 5600K+1/8ND|Scan size|4:3 (DXF-701), 4:3/16:9 Switchable (DXF-701WS)| ||3: 5600K|Indicators:|REC x 2, TAKE, BATT, SHUTTER, GAIN UP| ||4: 5600K+1/64ND|Resolution:|600TV lines| |Lens mount:|2/3-inch mount|Power requirements:|DC12V| ||NTSC color|Power consumption:|2.1W| ||2:1 interlaced, 525 lines, 60 fields/sec.|Weight:|660g (1 lb 7 oz)| |Horizontal|15.734 kHz|Dimensions (w/h/d):|Approx. 236 x 85 x 219 mm| |Vertical|59.94 Hz||| ||Internal and External with the VBS or BS||| |Horizontal resolution:|D30: 850TV lines|Focal length:|9 to 162mm| ||D30WS: 700TV lines (16:9), 700TV lines (4:3)|Zoom ratio:|18 x| |Vertical resolution:|400TV lines (without EVS), 450TV lines (with EVS)|Zoom control:|Manual/ Motorized| |||Maximum aperture ratio:|1:1.8 (f=9 to 117) 1:2.5 (f=162)| ||0.8 lx with F1.8, (30dB+DPR)|Iris control:|Manual/ Auto, selectable F1.8 to F16 and C (Close)| |||Range of object field:|W(Wide angle): 782 x 592 mm (31 1/8 x 23 3/8 inches)| |||(at a distance of 0.9m)|T(Telephoto): 45 x 34 mm (1 13/16 x 1 3/8inches)| ||+24dB, 24dB+DPR, Gain (30dB+DPR)|Minimum object distance:|0.9 m (35 1/2 inches)| |Shutter selection:|OFF, 1/100, 1/250, 1/500, 1/1000, 1/2000 sec or CLS|to 1/200.3) Filter Thread:|82 mm P=0.75 mm (lens)| |ratio:|63dB|Mount:|Bayonet mount| ||0.05% (all zones, without lens)|Mass:|Approx. 1.3kg (2 lb 14 oz) without lens hood| PVW-D30 Camcorder Power consumption: Mass: 1. (with DXF-701WS Viewfinder) 8.1kg (17 lb 14 oz) (incl. DXF-701WS viewfinder, microphone, 1. -916BYA lens, NP-1B battery, videocassette, carrying handle) 60 min. 123 x 232 x 367 mm (4 7/8 x 9 1/4 x 14 1/2 inches) Operating time: Dimensions (w/h/d): Design and specifications subject to change without notice. Power HAD, Power HAD WS, DVCAM, ClipLink, Clear Scan, Hi8, SetupNavi, SetupLog, Betacam SX, EditStation and Betacam SP 2000PRO are trademarks of Sony Corporation. Sony and Betacam SP are registered trademarks of Sony Corporation. # Distributed by DSR-130 Camcorder VCL-918BY Zoom Lens Dimensions: Approx. 122 x 102 x 219.7 mm (4 7/8 x 4 1/8 x 8 3/4 inches) with lens hood # LC-421 Carrying Case Mass: Dimensions (w/h/d): Approx. 7.7kg (17 lb) Approx. 790 x 440 x 340mm (31 1/8 x 17 3/8 x 13 1/2 inches) # Dimensions # DXC-D30/D30WS # PVW-D30 242 (9 5/8) 164 (6 1/2) 242 (9 5/8) 609 (24) 273 (10 3/4) 367 (14 1/2) 480 (19) # DSR-130 242 (9 5/8) 586 (23 1/8) 344 (13 5/8) MK4246/2OHB-9801 # Printed in Japan ©1998 Sony Corporation